Create an Account - Increase your productivity, customize your experience, and engage in information you care about.
This application is for a Sign Permit only. Separate permits are required for Electrical work being done.
Fill out information about the sign/business where the project is to take place.
Fill out the address, including suite number (if applicable) where the project is to take place. If there are multiple addresses, include EVERY address.
Cost of entire project, including labor and material.
Fill out the name of the business the project is for.
Type of Existing Signage on Property
Total Number of Proposed Permanent Signs
Type of Sign:
The following information must be on your plans & documents in ePlans:
Location, Height, Width, Depth, Square Footage, Sign Construction, Wall Area Square Footage.
The following information must be on your plans & documents in ePlans: Location, Height, Width, Depth, Square Footage, Sign Construction, Wall Area Square Footage.
Use this space if you have more than 4 signs. The following information must be on your plans & documents in ePlans: Location, Height, Width, Depth, Square Footage, Sign Construction, Wall Area Square Footage.
Type of Sign
Enter the square foot of the wall face where the temporary sign will be placed.
Single Tenant Parcel ONLY
Single Tenant Parcel over 5 acres ONLY
As a tenant applying for a Temporary Sign Permit, a letter from the Property Owner stating the tenant is allowed to have a temporary sign is required to be submitted.
As applicant you will be responsible for all tasks in ePlans and uploading all related plans and documents in this system. You can add additional contacts in the ePlans system if there are additional people who need access to the project in ePlans. Within 1 business day of submitting the permit application you will receive an email from ePlans inviting you to the project. Please see the handouts on the City website for more information on the ePlans system.
I hereby apply for a Temporary Sign Permit and acknowledge that the information submitted in this application is complete and accurate and that THIS IS NOT A SIGN PERMIT. The work will be performed in accordance with the conditions of the permit; and that the work will conform to the ordinances of the City of St. Cloud. I understand the sign cannot be displayed until the permit is issued and I receive the permit to place on the sign.
Typed name above shall constitute an electronic signature.
As Contractor I acknowledge that I am responsible for the work performed under this permit and that all work will be done in accordance with the conditions of the permit; the approved plans and specifications; the ordinances of the City of St. Cloud; and the Minnesota State Building Codes. The work will remain accessible and exposed for inspection purposes. The person doing the work shall call for the inspections and a 24-hour notice is required. The permit will become void if work does not begin within 180 days or is suspended at any time for over 180 days.
Name of licensed sign hanger company.
City issued License Number. Number should start with "BSIG".
Fill out information on contact person during construction, this contact will receive emails on inspection results.
This field is not part of the form submission.
* indicates a required field